Kai Shun Classic Whetstone - #1000/#6000 - Made In Japan (DM-0600) Metro Department Store
Enjoy free delivery with min. spend of $150!
 
Kai Shun Classic Whetstone - 10006000 - Made In Japan DM-0600

KAI SHUN (旬)

Kai Shun Classic Whetstone - #1000/#6000 - Made In Japan (DM-0600)

S$118.00
QTY:
   4084222

WISHLIST      |         RETURNS & REFUNDS      |    SHARE: 
Kai DM-0600 Stone for sharpening kai knives in the traditional Japanese way, and therefore, professional, we recommend a series of sharpening stones for sharpening.
Here you will find detailed instructions for sharpening your single or double-sided sharpening knives with traditional Japanese sharpening stones.

- Two grits in one whetstone - Fine and Finer
- Whetstone has 1,000-grit waterstone on one side and 6,000-grit waterstone on the other
- Fine, Japanese waterstones; soak before using
- Includes rubber tray for stability when sharpening
- This whetstone needs to be soaked thoroughly before sharpening
- Made in Japan

How to sharp a knife

1) Prior to using the wet stone it should be completely soaked in water for about 5 to 10 minutes. Please make sure that the stone is always slightly wet during the sharpening process.

2) When Sahrpening single-edge Knives the ground side should be treated first. Make sure that you maintain the original angle given by the manufacturer. If at all possible apply an angle of 45° (to achieve the best possible surface). Grind towards the edge using pressure; release the pressure on the way back. Apply as often as necessary to achieve the desired degree of sharpness. Once finished on this side, turn the blade over and start on the other side but only approx. 1/10th as often as before.

3) Double-edged knives need the same treatment but with an angle of 15°. Both sides need to be ground evenly to restore the symmetrically ground edge.